Máquina de prensa de Ower World fabricante y proveedor

Tel: 86-15696788493  Correo electrónico:  Sales3@worldPowress.com

Página de inicio  > PRODUCTO  > Máquina de prensa de potencia  > P Power Power Press  >  JH25 C Frame (C Tipo) Máquina de prensa de prensa y potencia de doble manivela
该产品后台详情无内容

JH25 C Frame Double Crank Punch Press

JH25 C frame double crank power press (press machine, punching press, punching machine, mechanical power press, stamping press), capacity from 110ton to 315ton, PLC control, wet clutch, hydraulic overload protected, both mechanical and electric cam control, auto lubricated.

 

Bigger table better for big sheet stamping or progressive die stamping process. Light curtain, inverter, air cushion are optional.

SPECIFICATION

ITEMCODEUNITJH25-110JH25-160JH25-200JH25-250JH25-315
Nominal CapacityPeKN11001600200025003150
Stroke LengthSmm180200250280280
Stroke SpeedFixed spm5045353030
Variable(optional) spm35-5535-5525-4020-3520-35
Max. Die Shut HeightH2mm400450500550550
Die Shut Height Adjustmenttmm90100110120120
Throat DepthGmm350390430470480
Distance Between UprightsNmm14701600192021902170
Table SizeF-BDmm680760840920940
L-RCmm18802040242027002800
ThicknessH3mm155165170180190
Slide Bottom SizeF-Bbmm520580650700700
L-Ramm14001500185021002100
Table Surface HeightH1mm900900100011001090
Overall DimensionsF-BAmm18202080237027002730
L-RBmm19702150255028502840
HeightHmm32003380382041804180
Motor Power KW1118.5223037
Weight(approximate) kg140001900026503500036000

OPTIONS

Light curtain; Inverter; Cushion; Decoiler; Straightener; NC Feeder; Transfer Bar; Manipulator;

BIGGER TABLE FOR SHEET METAL PRORESSIVE DIE STAMPING

JH25 C frame double crank punching press has a wider table which is more suitable for progressive die stamping. Double cross located crankshafts reverse rotated to eliminate each lateral force.

Pneumatic slide balance cylinder is equipped to balance the slide weight and upper die weight. Press is timing by two big gears which are oil bath in the top oil house.

C frame steel welded body has high rigidity after heat treatment and ball ballasting treatment. All the welded points are inspected by ultrasonic and top oil house is tested by oil bath to ensure no any leaking.

WET TYPE PNEUMATIC CLUTCH AND BRAKE

JH25 punching press with pneumatic wet clutch can work as continuous, inches or single stroke, more choices for operators.

Each clutch is under balance testing and temperature testing before assembling to the press. High quality friction discs ensure long service life.

No need to change them within 3 years. Special high quality Y type seal rings ensure no oil leaking.

Siemens Motor, Schneider Electric Components

The press is equipped with Siemens main motor and Schneider electric components.

Hydraulic Overload Protected Pump

The press is standard equipped with Japanese SHOWA hydraulic overload pump. Normally the system is set as 110% of the nominal capacity. The press will stop immediately once it is overload than 110% to protect both the press and the die. It is easy to reset the overload as there is a reset switch on the control panel. The system can be reset within 3 minutes.

 

Panasonic or Mitsubishi PLC

PLC control system can be Panasonic or Mitsubishi brand.

 

PLC CONTROL WITH HMI

PLC central control system makes the press easily operation and inspection. HMI has functions of system setting, I/O monitor, counter and preset counter. The operator can set the lubrication frequency by the HMI according to the working time or working stroke times.The press has both mechanical and electrical cam controllers. It is easy to set the cam angles to match the press with automatic uncoiler straightener feeder system or transfer bar system.

product_message

Loading_verification_code

Please_complete_verification_first

社媒暂无评论
Chat en línea 编辑模式下无法使用
Chat en línea inputting